![\"\"](\"https:\/\/www.bumax-fasteners.com\/wp-content\/uploads\/2023\/11\/ETPathfinder_HighResolutionFrame2172_txt-1024x367.jpg\")
<\/p>\n","protected":false},"excerpt":{"rendered":"ETpathfinder is an R&D facility at Maastricht University for testing and prototyping innovative concepts and enabling new technologies for the Einstein Telescope (ET) \u2013 a next generation underground gravitational wave observatory. The ET is being developed to be 100 times more sensitive than current instruments and is scheduled for completion in 2035. The telescope will enable scientists to study the precise structure of neutron stars, the birth of black holes and the structure of the universe immediately after the Big Bang.<\/p>\n
The ETpathfinder equipment is currently being assembled in a cleanroom that includes a large vacuum vessel containing various optics and seismic attenuation structures to isolate the test setup as much as possible from any noise from the outside world. The test setup resides in a vacuum to further remove vibrations carried through the air, and to also minimize interference of air molecules with the optics and lasers.<\/p>\n
\u201cBecause we can\u2019t use any oils or lubricants in our cleanroom, regular fasteners just aren\u2019t an option,\u201d explains Mathijs Baars, Mechanical Engineer at the Dutch National Institute for Subatomic Physics (Nikhef). \u201cWe investigated various fastener alternatives, including titanium-nitride coated fasteners, but BUMAX was the only solution that fully met our requirements while still being cost effective.\u201d<\/p>\n
BUMAX is supplying bolts, washers and nuts in the BUMAX\u00ae 88 stainless steel grade that offers anti-galling properties. Galling is common with regular stainless steel fasteners particularly in clean environments and involves the fastener seizing up with the internal threads as a result of cold welding.<\/p>\n
ETpathfinder will be a scientific set up where some parts may need to be disassembled and reassembled more than 100 times over the next couple of decades or so. Any galling issues would have serious consequences for the project, particularly due to its cleanroom environment.<\/p>\n
\u201cThe worst-case scenario for us would be if a galled fastener were to weld with one of our custom-made vacuum parts as these would be very costly to replace,\u201d says Baars. \u201cThis is why choosing fasteners with anti-galling properties is essential risk management for the entire ETpathfinder project \u2013 particularly in the vacuum chamber where we will only use BUMAX fasteners.\u201d<\/p>\n
The BUMAX\u00ae 88 bolts and nuts delivered to the ETpathfinder project are electro polished, receive kolsterised treatment and are cleanroom packed. This is important to avoid particles from the nuts and bolts in the ETpathfinder cleanroom and Kolsterisation increases surface hardness, which further reduces the risk of galling.<\/p>\n
The ETpathfinder mirrors will be cooled to 8 Kelvin\u00a0(-265\u00b0C) when they are operational to ensure optimum performance. The mirrors are cooled to reduce thermal noise, which is the vibration of atoms that scales with that atom\u2019s temperature.<\/p>\n
Metals typically become brittle at cryogenic temperatures, which makes them prone to sudden failure. However, BUMAX\u00ae 88 fasteners provide good resistance to cryogenic temperatures due to their high material quality, low impurities and high-quality finish. Third-party tests have shown that BUMAX\u00ae 88 fasteners retain excellent ductility even in temperatures as low as 0 Kelvin\u00a0(-273\u00b0C).<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
About ETpathfinder ETpathfinder is an R&D facility at Maastricht University for testing and prototyping innovative concepts and enabling new technologies…<\/p>\n","protected":false},"author":1,"featured_media":4615,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[10],"tags":[],"class_list":["post-4614","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-customer-case","market_segment-general-engineering-fr","market_segment-research-institutes","market_segment-space"],"yoast_head":"\n